| |
- Ideal for commercials
- Interchangeable screw-in base weight with swivel eye.
- Available in 1.0g, 1.5g, 2.0g and 2.5g base weight sizes. All models require an extra 3 x no.6+.
Colour may vary.... »more
info
|
- Ideal for commercials
- Interchangeable screw-in base weight with swivel eye.
- Available in 1.0g, 1.5g, 2.0g and 2.5g base weight sizes. All models require an extra 3 x no.4+
Colour may vary.... »more
info
|
- Ideal for commercials
- Interchangeable screw-in base weight with swivel eye.
- Available in 1.0g, 1.5g, 2.0g and 2.5g base weight sizes. All models require an extra 3 x no.8+.... »more
info
|
- Sits perfectly in the water when groundbait mix is squeezed around the feeder
- No additional shot required
- Extra tough construction
- Available in standard or large sizes... »more
info
|
Baggin' Machine Series 1 pole floats feature a unique in line tube through the body as well as the normal side eye. The in line tube provides incredible strength, prevents the line cutting into the fl... »more
info
|
Baggin' Machine Series 3 pole floats feature a unique in line tube through the body as well as the normal side eye. The in line tube provides incredible strength and also prevents the line cutting int... »more
info
|
- Ideal loose feed float for use on carp lakes
- Super strong
- Made from crystal clear plastic
- Available in small or large sizes... »more
info
|
Multi-compartmented folding bits box, ideal for carrying small bits and pieces around in your pocket.
Note - Contents in image not included, for illustrative purposes only.... »more
info
|
- Made from crystal clear plastic
- Short length, but high capacity due to the increased body diameter
- Interchangeable screw-in base weight with swivel eye
- Ideal for use on commercials
- Starl... »more
info
|
- Made from crystal clear plastic
- Short length, but high capacity due to the increased body diameter
- Interchangeable screw-in base weight with swivel eye
- Ideal for use on commercials
- Avail... »more
info
|
- Alloy strong frame
- Strong die cast alloy spreader block
- Seven stitched
- Fast flow safe mesh
- Brass thread
... »more
info
|
- Incredible stretch allows you to set up
with a shorter length of elastic.
- Perfect recoil – outer colour
impregnated sleeve gives pull back
tension power
- Hi Vizibility
- Developed over a tw... »more
info
|
- Super tough construction with hollow tip
- Available in 4x12, 4x14 and 4x18 sizes
Note - Colour may vary to image.... »more
info
|
Features:-
- Carp Match eyed hook tied with a knotless knot with Las-soo hair noose (Image below)
- Lo-viz flourocrystal line
- Ideal for all size pellets
- Each packet contains 6 hooks to nylon,... »more
info
|
Features:-
- Black alloy frame
- Seven stitched
- Quick shake dry
- Soft latex coated netting
- Pat. Pend. Quick Fish Release pull handle
- Less likely to spread disease
- Alloy block and brass... »more
info
|
- Knotless knot system with meat screw on a hair
- Meat screw knot super glued for extra security
- Ideal for use with luncheon meat or cat meat
- 6 pieces per packet
- Available in sizes 6 (to 10... »more
info
|
Strong enough to handle 12lb mainlines and big heavy method feeder floats. In fact the power in the mid section of these rods is quite incredible - bend it to the limit and the butt just keeps going!... »more
info
|
- Flat base micro plummets, ideal for silt bottoms
- Hook through eye, slide silicone sleeve up to hold in place
- Ideal for use with a pole
- Weight: 3.6g
- 2 per pack... »more
info
|
- Knotless knot system with paste microcoil on the hair
- Simply mould paste around the coil
- 6 pieces per packet
- Available in sizes 10 (to 8lb line), 12 (to 6.1lb line), 14 (to 6.1lb line), 16... »more
info
|
- Bait spike mounted on a hair
- Simply push the spike into the pellets
- 6 pieces per packet
- Available in sizes 8 (to 8lb line), 10 (to 8lb line), 12 (to 6.1lb line), 14 (to 6.1lb line) and 16 (... »more
info
|